Necessity of stirring for outdoor microalgal-bacterial granular sludge process

As a green process, microalgal-bacterial granular sludge (MBGS) process shows talents in achieving pollutant removal, resource recovery and carbon neutralization. However, when it comes to application, the adequate mixing of MBGS and substrate should be adopted theoretically. Therefore, this study devoted to address the necessity of stirring for MBGS in municipal wastewater treatment. Outdoor performances showed that stirring significantly enhanced both of the photosynthetic efficiency and biomass productivity of MBGS with almost 2-fold increase as compared to non-stirred MBGS, while the average pore size and microalgae-to-bacteria ratio also increased. Consequently, stirring acted as a pivotal role in accelerating pollutants removal, with removals of organics (89.89% COD) and nutrients (99.22% NH₄⁺-N, 92.15% PO₄^3--P) reaching peak levels at 2 h and 6 h, respectively, while removals of organics (87.50% COD) and nutrients (86.11% NH₄⁺-N, 86.76% PO₄^3--P) removal peaked at 8 h for non-stirred MBGS. The improved granule characteristics and microbial compositions due to the stirring were found to be favorable for MBGS to adapting to the changeable weather. Based on the above results, the possible underlying mechanisms of stirring for improving MBGS were illustrated. Overall, stirring positively impacted the photosynthetic efficiency, biomass productivity, pollutant removal and microbial structure for MBGS. This study gains knowledge on stirred MBGS process under outdoor conditions for its future practical application.