Ultrasounds assisted one-pot oxidative desulfurization of model fuel using green synthesized aluminum terephthalate...

Oxidative desulfurization (ODS) is considered to be one of the most promising desulfurization processes as it is energy-efficient and requires mild operating conditions. In this study, a novel green synthesized Al- based metal-organic framework with high surface area has been synthesized hydrothermally using waste polyethylene terephthalate bottles (PET) as a source of terephthalic acid as an organic linker. The prepared Al based MOF have been characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscopy (TEM). The catalytic activity of the prepared Al-MOF was evaluated in the oxidative desulfurization (ODS) of both modeled and real crude oil samples. The different operating parameters (temperature, time, catalyst dose, oxidant loading and sonication) on the ODS performance have been optimized. The optimal conditions for maximum removal of thiophene from modeled oil samples were found to be 30 min, 0.5 g of catalyst and 1:3 oil to oxidant ratio. Under the optimized conditions, sulfur removal in real oil samples obtained from Alexandria petroleum company was 90%. The results revealed that, the presented approach is credited to cost-effectiveness, environmental benignity, and ease of preparation, predicting great prospects for desulfurization of fuel oils on a commercial level.