Related Experiment Video
Updated: Jul 18, 2025

All-electronic Nanosecond-resolved Scanning Tunneling Microscopy: Facilitating the Investigation of Single Dopant Charge Dynamics
Published on: January 19, 2018
Single Event Upset Study of 22 nm Fully Depleted Silicon-on-Insulator Static Random Access Memory with Charge Sharing
Chenyu Yin1, Tianzhi Gao1, Hao Wei1
1Key Laboratory for Wide Band Gap Semiconductor Materials and Devices of Education Ministry, School of Microelectronics, Xidian University, Xi'an 710071, China.
Abstract:
In this paper, the single event effect of 6T-SRAM is simulated at circuit level and device level based on a 22 nm fully depleted silicon-on-insulator (FDSOI) process, and the effects of charge sharing and bipolar amplification are considered in device-level simulation. The results demonstrate that, under the combined influence of these two effects, the circuit's upset threshold and critical charge decreased by 15.4% and 23.5%, respectively. This indicates that the charge sharing effect exacerbates the single event effects. By analyzing the incident conditions of two different incident radius particles, it is concluded that the particles with a smaller incident radius have a worse impact on the SRAM circuit, and are more likely to cause the single event upset in the circuit, indicating that the ionization distribution generated by the incident particle affects the charge collection.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...

