Related Experiment Video
Updated: Jul 17, 2025

In Vitro Method to Control Concentrations of Halogenated Gases in Cultured Alveolar Epithelial Cells
Published on: October 23, 2018
Bone Cement Fumes Generated in Laminar Airflow Versus Conventionally Ventilated Operating Rooms: Does the Mixing
Matthew P Jamison1, Emily R Hunt2, Mary Catherine West1
1Department of Orthopaedic Surgery, Brigham & Women's Hospital, Boston, Massachusetts.
Background:
Bone cement is commonly utilized in a variety of orthopaedic procedures and contains methylmethacrylate (MMA) monomer. MMA is a colorless, clear, flammable liquid of intense odor. Its vapor concentration in the immediate breathing zone can vary considerably in the operative setting and, in higher concentrations, can become an occupational health hazard. Therefore, reducing MMA vapor is desirable. The aim of this study was to compare the MMA vapor levels emitted during mixing among 5 commercially available cement-mixing systems across 2 operative settings: an operating room (OR) with conventional ventilation (CV) and an OR with laminar airflow (LAF).
Methods:
A prospective, in vitro study was conducted at a single hospital in an OR with LAF and in an OR with CV. MMA vapor release during the cement preparation of a SAWBONES femoral canal was measured with use of a calibrated MiniRAE 3000. A total of 5 different vacuum cement-mixing systems were utilized to mix the same cement type according to the manufacturer instructions of each system. MMA vapor concentrations were measured during 5 phases of mixing, and each mixing system was randomly utilized 10 times in each OR.
Results:
When comparing the MMA concentration levels of each system between the 2 settings, emissions remained generally higher in the CV setting for every system and in nearly every phase. Among the 5 systems analyzed, System #5, the only entirely closed system, had the lowest overall emissions for each of the 5 phases in the CV setting.
Conclusions:
This study demonstrated that an operative environment with LAF is conducive to clearing the fumes of MMA during mixing as well as limiting the amount of time that residual fumes linger after mixing. Additionally, the entirely closed cement-mixing system was the most effective in minimizing fume levels within the CV setting. Utilizing this closed system, especially in an OR with CV, may reduce exposure to MMA fumes from bone cement, potentially creating a more favorable working environment.
Clinical Relevance:
This study provides evidence that a closed cement-mixing system utilized under vacuum in both an OR with CV and an OR with LAF is effective in keeping MMA fume levels below those considered harmful by the U.S. Occupational Safety and Health Administration.
More Related Videos
Related Concept Videos
Factors Affecting Pulmonary Ventilation
Alveolar Surface Tension
The alveolar fluid lines the luminal surface of the alveoli and exerts a force called surface tension. This force is caused by the polar water molecules in the liquid being more strongly attracted to each...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Effects of Air-entrainment in Concrete
Transmission-based Precautions II: Airborne and Protective Environment
Airborne precautions:
Use airborne precautions when treating patients known or suspected to have diseases that spread through the air—for example, tuberculosis or measles. These organisms are present in smaller droplets expelled by an infected person and...
Cardiopulmonary Resuscitation II: ACLS Airway Management
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...

