Dust deposition mechanism and output characteristics of solar bifacial PV panels

The utilization of solar photovoltaic (PV) power generation represents a highly promising technological solution for addressing environmental challenges and energy crises. Dust deposition on the front and back surfaces of solar bifacial PV panels greatly decreases the optical performance and power generation. In this study, the dust deposition characteristics and mechanism of solar bifacial PV panels are investigated using the CFD-DEM method. The effects of the dust deposition rate on the output characteristics of bifacial PV panels are discussed. The research results show that the particle deposition behaviors on the back and front surfaces of bifacial PV panels are influenced by the deposition and separation forces at the left or right inlets. The dust deposition rate of windward surfaces can be 1.48-7.60 times that of the leeward surfaces of bifacial PV panels. The particle motion trajectories on the windward and leeward sides can be mainly divided into five and three kinds, respectively. The dust deposition rate of bifacial PV panels increases when the air inlet velocity decreases and the particle size and concentration and relative humidity increase. The open circuit voltage and short circuit current of bifacial PV panels decreased by 26.7% and 16.4%, respectively, when the dust deposition rate increases by 45.8%. The attenuation rate of the maximum output power of PV panels has a positive linear correlation with the dust deposition rate, as shown in Eq. 22. The bifacial PV panels have better output characteristics than the mono-facial PV panels with consideration of dust deposition.