Related Experiment Video
Updated: Jul 17, 2025

Author Spotlight: Technologies and Challenges in Elemental Analysis of Food Samples
Published on: December 22, 2023
Cleaning deteriorated elements of ammunition: Development of a procedure applied to cartridge cases from the Second
David Rumo1, Denis Werner2, Damien Rhumorbarbe1
1Ecole des sciences criminelles, University of Lausanne, Quartier UNIL-Sorge, 1015 Lausanne, Switzerland.
Abstract:
Deteriorated elements of ammunition can be found while investigating different types of events. Exposure to adverse environmental conditions may lead to metal alteration (corrosion) or organic material deposition (contaminations) on the exposed elements of ammunition. From a forensic perspective, both types of deterioration pose challenges when observing marks left by the firearms used to discharge the corresponding ammunition (e.g. firing pin, extractor). The longer the time of exposure to the adverse environmental conditions, the more challenging the observation of such marks. A literature review highlighted three previously published restorative methods used to clean deteriorated elements of ammunition. The aim of this research is to develop a cleaning procedure applicable to cartridge cases exposed to adverse environmental conditions, while avoiding the degradation of marks left by the firearms used to discharge the corresponding ammunition. A first batch of 21 brass cartridge cases dating back to the Second World War (WWII) was used to develop a cleaning sequence involving the three methods. The efficiency of each restorative method was qualitatively assessed using optical macroscopy and the Evofinder® ballistic identification system. The developed sequence relies on successive applications of Tickopur® TR 7 (a diluted soft metal cleaner), sulfuric acid and finally Aqua Regia (HCl 37% and HNO3 75%), all of them involving ultrasonic baths. The resulting cleaning sequence was subsequently applied to three batches of Second World War cartridge cases discovered in France and Russia. This sequential procedure allows the effective cleaning of WWII brass cartridge cases while highlighting different marks left by firing pins, extractors, ejectors, and breech faces. Applying a forensic analysis and comparison process to the marks highlighted on these elements of ammunition can support the verification of historical facts when reconstructing events which took place more than seventy years ago.
More Related Videos
09:42Fabrication of a Dipole-assisted Solid Phase Extraction Microchip for Trace Metal Analysis in Water Samples
Published on: August 7, 2016
09:49Use of a Battery of Chemical and Ecotoxicological Methods for the Assessment of the Efficacy of Wastewater Treatment Processes to Remove Estrogenic Potency
Published on: September 11, 2016
Related Concept Videos
Washing, Drying, and Ignition of Precipitates
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...