Related Experiment Video
Updated: Jul 17, 2025

Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron
Published on: June 9, 2016
Gliding Arc Reactor under AC Pulsed Mode Operation: Spatial Performance Profile for NO Synthesis
Sirui Li1, Thijs van Raak1, Rutger Kriek1
1Inorganic Membranes and Membrane Reactors, Sustainable Process Engineering, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, De Rondom 70, Eindhoven 5612 AP, The Netherlands.
Abstract:
A two-dimensional gliding arc reactor for NO synthesis was investigated in this study using AC pulsed mode operation. Tests with a duty cycle of 40 or 60% achieved the lowest energy consumption of 6.95 MJ/mol, which is an improvement of 15% from the case of continuous operation. Based on the results achieved, a new method for analyzing the spatial profile of the reactor was presented. The reactor was divided into five zones along the arc propagation, and results indicated that the first zone and last zone of the gliding arc reactor had higher energy consumption (9.59 and 8.63 MJ/mol, respectively), while lower consumption was observed in the middle parts of the reactor with a minimum of 5.00 MJ/mol. Spatial-resolved optical emission spectra, the deduced electron density, and temperature indicated the nonuniformity in plasma properties, which corresponds to the NO production performance across the reactor. This research provides information and discussion that can be used for understanding and optimization of gliding arc reactors toward efficient nitrogen fixation.
Related Concept Videos
Nuclear Fusion
A helium nucleus has a mass that is 0.7% less than that of four hydrogen nuclei; this lost mass is converted into energy during the fusion. This reaction produces about...
Atomic Emission Spectroscopy: Instrumentation
Inductively Coupled Plasma Atomic Emission Spectroscopy: Principle
The ions and electrons produced interact with the fluctuating magnetic field created by a water-cooled...
Source Transformation for AC Circuits
Atomic Emission Spectroscopy: Overview
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used....

