Related Experiment Video
Updated: Jul 17, 2025

Reaction Kinetics and Combustion Dynamics of I4O9 and Aluminum Mixtures
Published on: November 7, 2016
Study of the Structural Changes and Internal Activator Transport Behavior after Activation of Aluminum-Based
Kai Si1, Chongxin Liu1, Dequan Zhang1
1Institute of Food Science and Technology, Chinese Academy of Agriculture Sciences, Key Laboratory of Agro-Products Quality and Safety Control in Storage and Transport Process, Ministry of Agriculture and Rural Affairs, Beijing 100193, China.
Abstract:
Aluminum-based flameless ration heaters (AFRHs) are heating elements in food packaging. Water is used to activate AFRHs. The material properties of each region of AFRHs were determined by X-ray diffraction, scanning electron microscopy, and hydrogen and heat generation. The results show that the internal cross-section shows stratification with hydrogen and heat production capacities of 105.2 ± 9.7 mL/g and 1435.0 ± 30.3 J/g for the outer layer, 27.1 ± 4.4 mL/g and 80.4 ± 3.1 J/g for the inner layer, and 1.1 ± 0.01 mL/g and 1.2 ± 0.05 J/g for the middle layer, respectively. According to the correspondence between aluminum and hydrogen in the aluminum-water reaction relationship, the reaction efficiency of the outer layer and the inner layer is as low as 64 and 80%, which is an indication of low reaction efficiency. To analyze the reasons for low reaction efficiency, a pore channel model of 3.5 nm tricalcium aluminate (C3A) was developed using molecular dynamics (MD) to reveal the adsorption behavior of the activator in the pore channel. The results show that the activator is subject to solid surface adsorption in the pore channel with a low diffusion coefficient. Oxygen atoms on the surface adsorb hydrogen atoms to form hydrogen bonds and sodium ions to form ionic bonds with calcium ions. This increases the retention time of the activator on the surface. The MD results explain the low reaction efficiency of AFRHs at the microscopic scale. Moreover, it provides ideas and a basis for the optimization of AFRHs.
More Related Videos
Related Concept Videos
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Mechanisms of Heat Transfer II
Mechanism of heat transfer
Mechanisms of Heat Transfer I
Combustion Energy: A Measure of Stability in Alkanes and Cycloalkanes
Alkanes undergo combustion in the presence of excess oxygen and high-temperature conditions to give carbon dioxide and water. A combustion reaction is the energy source in natural gas, liquified...
Flame Photometry: Lab

