Related Experiment Video
Updated: Jul 17, 2025

Sampling, Identification and Characterization of Microplastics Release from Polypropylene Baby Feeding Bottle during Daily Use
Published on: July 24, 2021
[Plasticizers Used in Polyvinyl Chloride Toys (2019-2020)]
Yutaka Abe1, Miku Yamaguchi1, Yohei Kataoka1
1National Institute of Health Sciences.
Abstract:
We determined the fifteen types of plasticizers, including four kinds of phthalic acid esters (PAEs) used in 220 polyvinyl chloride (PVC) toys on Japanese market from 2019 to 2020. Three kinds of previously undetected types of PAEs were also detected, but not identified in this study. Di (2-ethylhexyl) terephthalate (DEHTP) was the highest detection rate in 209 soft PVC toys out of 220 toys, with 71.2% for designated toys and 88.9% for not-designated toys, respectively, showing a gradual increase from the previous reports in 2009 and 2014. On the other hand, the usages of o-acetyl tributyl citrate and adipic acid esters decreased, but the six types of PAEs prohibited to use for the designated toys in Japan were not detected in them, the usage of diisobutyl phthalate were increased. In contrast, four types of PAEs were detected in not-designated toys. Among them, the detection ratio of di (2-ethyhexyl) phthalate decreased to about 1/10. The content levels of plasticizers in per each sample were continued to keep low level from the report five years ago. These results showed that the main plasticizer used in PVC toys is DEHTP, and that the usage of other plasticizers was decreased.
Related Concept Videos
Plasticizers
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...
Superplasticizers
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Additives and Fillers in Concrete
The...
Polymer Classification: Architecture
Polymer Classification: Stereospecificity

