Reconfigurable integrated structures with functions of Fabry-Perot antenna and wideband liquid absorber for radar...

This paper proposes a functionally reconfigurable integrated structure of a Fabry-Perot (FP) antenna and wideband liquid absorber. First, a two-layer partial reflecting surface (PRS) has been designed. Then, a patch antenna is used to act as the source antenna. By combining the source antenna with the PRS, an FP antenna has been designed. What's more, taking full advantage of the reflective properties of PRS, a liquid broadband absorber is then designed. Last, the integrated structure with two functions has been realized. It can be used as the FP antenna or the liquid absorber through the extraction and injection of ethanol. In this way, it is effective to switch between stealth and detection states which can be used in different electromagnetic environments. The PRS is elaborately tailored to serve as both a component of the FP antenna and the metal ground of the broadband liquid absorber. Then the integrated structure is realized by combining the FP antenna with the liquid absorber. The PRS is composed of patches on the top layer of the substrate and the square loop on the bottom. The liquid absorber is composed of a 3-D printed container, 45% ethanol layer and the PRS is used to serve as the metal ground. The formula of Mie resonance theory has been extended and used to design the liquid absorber. The gain of the antenna is 19.7 dBi when the ethanol is extracted. When the ethanol is injected, a wideband liquid absorber is achieved. The absorption band (S₁₁ < - 10 dB) ranges from 4 to 18 GHz. The absorption bandwidth is over 133%. The monostatic RCS reduction bands of the structure with ethanol range from 4 to 18 GHz and the average RCS reduction is 28.4 dBsm. The measured and simulated results are in good agreement.