Related Experiment Video
Updated: Jul 17, 2025

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
Event-Triggered Adaptive Antidisturbance Switching Control for Switched Systems With Dynamic Neural Network
Abstract:
In this article, a dynamic event-triggered adaptive antidisturbance (ETAAD) switching control strategy is proposed for switched systems subject to multisource disturbances. The disturbances are divided into two categories: the available unmodeled disturbance and the unavailable dynamic neural network modeled disturbance. First, a dynamic ET criterion is set based on the system state. Then, a novel dynamic ETA disturbance estimator is introduced to observe the modeled disturbance. Furthermore, according to the ET rule and adaptive disturbance observer, a switched controller is designed. Next, under the controller and switching criterion with the average dwell time limitation, sufficient conditions are given to force the switched systems to realize multisource disturbance suppression (DS), trajectory tracking, and communication resource (CR) saving simultaneously. Meanwhile, the Zeno phenomenon may be caused by the ET rule being excluded. In addition, the presented ETAAD approach is also applicable to the nonswitched systems case. Finally, a simulation case is given to validate the effectiveness of the dynamic ETAAD switching control method.
Related Concept Videos
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Multi-input and Multi-variable systems
In the absence...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...

