Digital Twin Modeling of Flexible Perovskite Nano-Films with In-Situ Mechanical Microscopy Validation

Flexible perovskite solar cells introduce opportunities for high throughput, high specific weight, and short energy payback time photovoltaics. However, they require additional investigation into their mechanical resiliency. This work investigates the mechanical properties and behaviors of perovskite thin films and builds a robust model for future research. A two-pronged approach was utilized. Perovskite thin films were flexed in a three-point bend mode with in-situ SEM. Novel insights into the perovskite mechanical behaviors with varying substrate layers were gained. Modeling and validation, the second prong, was completed with finite element analysis. Model coupons of the imaged perovskite architectures were built, with sensitivity analysis completed to provide mechanical property estimates. The results demonstrate that mechanical degradation of perovskite thin films on polyethylene terephthalate (PET) primarily presents as a crack in the grain boundaries between crystals. Perovskite thin films on Indium Tin Oxide (ITO) and PET primarily crack in a periodic pattern regardless of the placement of perovskite crystals.