Related Experiment Video
Updated: Jul 16, 2025
Full-field Strain Measurements for Microstructurally Small Fatigue Crack Propagation Using Digital Image Correlation Method
Published on: January 16, 2019
Application of Extended Finite Element Method for Studying Crack Propagation of Welded Strip Steel in the Cold
Jianjun Chen1, Chaojie Wu1, Jiacong Ying1
1School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China.
Abstract:
In the cold rolling process, edge cracks, particularly those near the welded zone, can inadvertently lead to strip rupture. This study employed the extended finite element method (XFEM) to analyze the crack propagation behavior in welded strip steel during cold rolling. Various tests such as the tensile test, essential work of fracture (EWF) test, spherical indentation method, and elastoplastic finite element simulations were conducted to determine the maximum principal stress and fracture energy utilized in XFEM for the base metal and weld metal, respectively. A continuous cold rolling model was established to investigate the crack propagation behaviors in the base metal, weld metal, and the interface between the base and weld metal. In the continuous rolling process, the crack propagation and expansion speed in the base metal are much larger than that of the weld zone. In addition, the base metal at the back end of the rolled piece is more prone to fracture than the base metal at the front end.
Related Concept Videos
01:18Mechanical Characteristics of Steel
The tension test is fundamental for determining tensile strength. In this test, a steel specimen is stretched using a gripping device until it breaks. The data collected during this test are used...
01:23Stresses under Combined Loadings
The process begins by slicing the tube at critical points and analyzing the internal forces and stress components at these sections, focusing on the centroid. Normal stresses, generated by axial forces and bending moments, are either compressive or tensile and vary across the section from...
01:26Residual Stresses
01:12Temperature Dependent Deformation
01:17Steel Fastening Techniques
Rivets are cylindrical steel fasteners with a specially designed head. During application, rivets are heated until white-hot and then inserted through pre-drilled holes in the steel sections. A pneumatic hammer is used to shape the exposed end into a second head, securing the sections together.
Bolting is another...
01:07Unsymmetric Loading of Thin-Walled Members: Problem Solving
To compute the shear forces, find the shear flow at a specific distance from the endpoint using the vertical shear and the moment of inertia values. The total shear force on the flange is calculated by integrating the shear flow from one end of the flange to the other.
Next, calculate the moments of...