Encapsulation and thermal properties of composite phase change materials based on cobalt/nitrogen double-doped ZIF-67...

To solve the problems of easy leakage and weak thermal conductivity of single-phase change material, in this experiment, cobalt/nitrogen-doped ZIF-67 derived carbon (CoN-ZIF-Cx) was constructed as the carrier material, and paraffin was used as the phase change core material to construct thermally enhanced shaped composite phase change materials (P_0.6@CoN-ZIF-Cx). The composite PCMs were characterized using scanning electron microscopy, isothermal nitrogen adsorption-desorption, X-ray diffraction, and Fourier infrared spectroscopy, and their performance was evaluated using transient planar heat source techniques, differential scanning calorimetry, and thermal cycling tests. The results indicated that the impurities of the acid-washed porous carbon material were reduced and the loading of the paraffin was 60%, and the prepared P_0.6@CoN-ZIF-Cx had an excellent thermal performance. Among them, P_0.6@CoN-ZIF-C3 has the melting and crystallization enthalpy of 71.03 J g^-1 and 68.81 J g^-1. The thermal conductivity is 0.4127 W m^-1 K^-1, a 46.19% thermal conductivity improvement compared with pure paraffin. It still has favourable thermal storage capacity after 50 cycles without paraffin leakage during the phase transition.