Related Experiment Video
Updated: Jul 16, 2025
Measuring the Complete-arch Distortion of an Optical Dental Impression
Published on: May 30, 2019
Fit of High-Translucency Zirconia Fixed Dental Prostheses Using Two Different Intraoral Scanners
Purpose:
To assess the marginal and internal fit of monolithic zirconia fixed dental prostheses (FDPs) comparing two different intraoral scanners (IOSs) and assessment methods.
Materials And Methods:
A maxillary typodont with three prepared teeth allowed fabrication of five-unit high-translucency monolithic zirconia FDPs. The typodont was scanned with two IOSs: Cerec Omnicam and 3Shape TRIOS 3. In total, 30 FDPs were milled from presintered high-translucency zirconia blocks. Dual-scan and silicone replica assessments were used to determine marginal and internal gaps.
Results:
A statistical significance was observed for marginal gaps (3Shape [74.27 ± 10.4 μm] and Cerec [86.45 ± 14.3 μm]) and for internal gaps (3Shape [126.12 ± 12.7 μm] and Cerec [112.38 ± 17.2 μm]).
Conclusions:
The outcomes of this study showed that the 3Shape TRIOS 3 produced a better overall marginal fit, while the Cerec Omnicam created a better internal fit. Additionally, a greater overall marginal and internal gap was noted with the silicone replica method over the dual-scan method.
