Prediction of fluids volume fraction and barium sulfate scale in a multiphase system using gamma radiation and deep...

In the oil industry, during the production of oil and gas, barium sulfate (BaSO₄) scale may occur on the inner walls of the pipelines leading to the reduction of the internal diameter, making the fluids' passage difficult and complicating the calculation of the fluids volume fraction. This paper presents a methodology to predict volume fraction of fluids and BaSO₄ scale thickness from obtaining spectra of two NaI(Tl) detectors that record the transmitted and scattered beams of gamma-rays. Theoretical models for a multiphase annular flow regime (gas-saltwater-oil-scale) were developed using MCNP6 code, which is a mathematical code based on the Monte Carlo method. The simulated data was used to train a deep neural network (DNN) to predict the volume fraction of gas, saltwater and oil, and the concentric scale thickness. A Python optimization library called Optuna was used for the hyperparameters search to design the DNN architecture. The methodology presented great results, especially for scale thickness prediction. Although the results for saltwater did not reach the same level, it was still possible to predict approximately 70% of the patterns up to 10% relative error. This achievement indicates the possibility to calculate the volume fraction of fluids and the concentric scale thickness in the offshore oil industry using gamma densitometry and deep learning models.