Removal of hazardous textile dye from simulated wastewater by municipal organic solid waste charcoal using machine...

This study focuses on the probable use of municipal organic solid waste charcoal (MOSWC) as an adsorbent for Methyl orange (MO) adsorption. The prepared MOSWC is characterized by FE-SEM and FT-IR. Batch adsorption experiments were conducted with the influencing of different operational conditions namely time of contact (1-180 min), adsorbate concentration (60-140 mg/L), adsorbent dose (1-5 g/L), pH (3-11), and temperature (25-60 °C). The high coefficient value (R = 0.96) of the process optimization model suggests that this model was significant, where pH and adsorbent dose expressively stimulus adsorption efficiency including 40.11 mg/g at pH (3), MO concentration (100 mg/L), and MOSWC dose (1 g/L). Furthermore, the machine learning approaches (ANN and BB-RSM) revealed a good association between the tested and projected values. The highest monolayer adsorption capacity of MO was 90.909 mg/g. Pseudo-second-order was the well-suited kinetics, where Langmuir isotherm could explain better for equilibrium adsorption data. Thermodynamic study shows MO adsorption is favourable, exothermic, and spontaneous. Finally, this study indicates that MOSWC could be a potential candidate for the adsorption of MO from wastewater.