Related Experiment Video
Updated: Jul 16, 2025

Measurement of Quantum Interference in a Silicon Ring Resonator Photon Source
Published on: April 4, 2017
Silicon-based compact eight-channel wavelength and mode division (de)multiplexer for on-chip optical interconnects
Abstract:
A compact wavelength and mode division (de)multiplexer is proposed for multiplexing a total of eight guided TE modes of a 220 nm thick silicon-on-insulator waveguide with input channels at two wavelengths of 1.55 and 2 µm for wavelength division multiplexing. The (de)multiplexer is composed of four sequentially arranged sections with bus waveguides of increasing widths. The first section uses an asymmetric directional coupler to couple one TE mode at 1.55 µm, while each of the next three sections consists of two collocated directional couplers to simultaneously couple two TE modes of the bus waveguide, one at each wavelength of 1.55 and 2 µm. Three linear adiabatic tapers are designed to connect the consecutive bus waveguides. The fundamental TE mode of the bus waveguide at 1.55 or 2 µm is coupled by using another adiabatic taper from a single-mode input waveguide. The simulation results show that over a broad bandwidth of >100n m the insertion loss and crosstalk for both wavelength bands is <1.15d B and <-27d B, respectively. In addition, a compact device footprint with a total coupling length of ∼61µm is achieved due to the use of collocated directional couplers in three sections.
Related Concept Videos
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Types of Semiconductors
Schottky Barrier Diode
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...

