Realizing high efficiency and luminance in green, yellow and blue organic light emitting diode by deoxyribonucleic...

Although the effect of the electron blocking layer (EBL) material, deoxyribonucleic acid (DNA), on the electroluminescence (EL) performance of organic light-emitting diodes (OLEDs) has been studied, the process of DNA regulation of exciton recombination region within the device is still unclear. Herein, devices with and without EBL were fabricated using different DNA spin-coating speeds, and the photoelectric performance of device were measured. By using DNA compounded with cetyltrimethyl ammonium (CTMA) as the EBL and hole buffer layer, so-called BioLEDs. The DNA-based green Alq₃BioLEDs achieve higher luminance (39 000 cd m^-2) and higher current efficiency (8.4 cd A^-1), which are increased by 49% and 54%, respectively, compared to the reference OLEDs without the addition of DNA. Similarly, the maximum luminance and efficiency of yellow Rubrene BioLEDs is increased by 64% (from 12 120 to 19 820 cd m^-2) and 74% (from 1.36 to 2.36 cd A^-1), the luminance and efficiency of blue TCTA BioLEDs is increased by 101% and 245%. Specifically, we found that as the thickness of DNA-CTMA increases, the exciton recombination region moves towards the interface between the emitting layer (EML) and the hole transport layer (HTL). By better confining excitons within the EML, the current efficiency of the BioLEDs is effectively improved. Accordingly, we provide a possible idea for achieve high performance DNA-based BioLEDs by adding DNA-CTMA EBL and hole buffer layers. Meanwhile, as the DNA thickness increases, the exciton recombination region moves towards the EML/HTL interface, thereby enhancing the efficiency of the DNA-based BioLEDs.