Related Experiment Video
Updated: Jul 16, 2025

X-ray Beam Induced Current Measurements for Multi-Modal X-ray Microscopy of Solar Cells
Published on: August 20, 2019
Study of dynamic biasing InGaAs/InAlAs avalanche photodiodes with different active areas
Abstract:
In this work, by comparing and analyzing dynamic biasing InGaAs/InAlAs avalanche photodiodes(APDs) with different active areas, it is found that they have different noise suppression frequency ranges. The upper limit frequency(defined as the frequency at which the noise suppression effect begins to fail) of InGaAs/InAlAs APDs with active area diameter of 50 µm, 100 µm and 200 µm are 2400 MHz, 1990MHz and 1400 MHz respectively. In addition, for InGaAs/InAlAs APDs with an active area diameter of 50 µm, 100 µm and 200 µm, their optimal frequencies of dynamic biasing (defined as the frequency corresponding to the optimal SNR) are 1877MHz, 1670 MHz and 1075 MHz respectively. At last, applying dynamic biasing technology, it achieves a useful gain of 6698.1, which is much greater than that of DC bias (47.2), and this technology has the potential to be applied in high sensitivity laser radar receivers.
Related Concept Videos
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Small-signal Diode Model
Diode: Reverse bias
Diode: Forward bias
The behavior of a diode in forward bias...

