Polarization- and angle-insensitive broadband long wavelength infrared absorber based on coplanar four-sized...

In many potential applications, there is a high demand for long wavelength infrared (LWIR) absorbers characterized by a compact configuration, broad operational bandwidth, high absorption efficiency, and polarization- and angle-insensitive characteristics. In this study, we design and demonstrate a high-performance broadband LWIR absorber based on coplanar four-sized resonators, consisting of arrays of titanium (Ti) disks with different diameters supported by a continuous zinc selenide (ZnSe) layer and by a Ti film acting as a back-reflector. Particle swarm optimization (PSO) is employed to optimize the complicated geometry parameters, and the final optimized device exhibits near-unity absorption (∼96.7%) across the entire operational bandwidth (8 µm∼14 µm) under unpolarized normal incidence, benefiting from the impedance-matching condition and the multiple surface plasmon resonances of this configuration. Furthermore, the proposed absorber is insensitive to the angle of incidence due to the localized surface plasmon resonances supported by these four-sized resonators, and is insensitive to the state of polarization thanks to the highly symmetric feature of the circular pattern. The measured absorption of the fabricated sample exhibits a relatively high coincidence with the simulation, with an average absorption of 88.9% ranging from 8 µm to 14 µm. The proposed absorber, which can be easily integrated into a standardized micro/nano manufacture process for cost-effective large-scale production, provides a feasible solution for improving optical performance in thermal emitter, infrared detection, and imaging applications. Furthermore, the generalized design principle employing the optimized method opens up new avenues for realizing target absorption, reflection, and transmission based on more complicated structure configurations.