Improvement on stability of direct modulation laser with integrated active feedback by partial corrugated gratings

Researchers have developed a uniform grating DFB with an integrated active optical feedback waveguide (UG-AFDFB) to enhance the modulation speed of direct modulation lasers (DMLs) while reducing costs based on identical active layer designations. However, this design has difficulties in obtaining high single mode yield (SMY) and low relative intensity noise (RIN) as a result of the strong optical feedback caused by the integrated active feedback waveguide (AFW) and the random phase of the facet phase. In this paper, a partial corrugated grating DFB with an integrated active optical feedback waveguide (PG-AFDFB) is proposed to address this issue. Comparison of SMY, S21, RIN, modulation eye pattern, and frequency chirp parameters between UG-AFDFB and PG-AFDFB based on time-domain transmission line laser mode reveals that PG-AFDFB with an optimized grating couple parameter κ performs significantly better than UG-AFDFB under the same conditions. Furthermore, the performance of PG-AFDFB is not sensitive to the random phase of the rear facet phase. Even when κ ranges from 6000 /m to 12000 /m, the current in the AFW is between 0 mA and 20 mA, and the length of the AFW ranges from 50 µm to 100 µm; the SMY of PG-AFDFB remains above 80%.