Fundamental research for dose control during supine dental panoramic radiography

This study aimed to control radiation doses when using a portable supine dental panoramic radiography system by measured the scattered doses.

The study used LPX7007 (Asahi Roentgen) for the panoramic radiography system. The subjects comprised a cylinder phantom (QualitA) and a RANDO Phantom (Alderson). The semiconductor dosimeter was an X2 survey sensor (RaySafe). The phantom was set at a height of 1 m from the floor, and the sensor was set at 1 m from the floor at the genital level and 1.5 m at the lens level. Measurements were taken at 30°intervals clockwise from 0°at distances of 0.5 m and 1 m in radius around the phantom. The occupational exposure range was defined as 0 ± 30° and the public exposure range was defined as the occupational exposure range and 30° to 150° and 210° to 330° as the public exposure range.

The highest doses were observed in the 120° and 240° directions, and the lowest in 0° ± 30° range. The lowest limit number of images taken in the occupational exposure range was 130 images at a distance of 0.5 m, 452 images at 1 m at the lens level for the cylinder phantom, and 320 images at 0.5 m and 1098 images at 1 m for the RANDO Phantom. In the public exposure range at the genital level, there was one image at 0.5 m and six images at 1 m for the cylinder phantom, and two images at 0.5 m and eight images at 1 m for the RANDO Phantom.

We found that radiation exposure can be reduced by keeping a distance from the subject, avoiding working at 120° and 240° and staying within 0° ± 30° behind the panoramic radiography system.