Related Experiment Video
Updated: Jul 16, 2025
Precision of In Vivo Quantitative Tooth Wear Measurement Using Intra-Oral Scans
Published on: July 12, 2022
In-vitro comparison of two different toothbrush bristles about peri-implant sulcus penetration
Marco Montevecchi1, Leoluca Valeriani1, Leonardo Bellanova2
1Division of Periodontology and Implantology, Department of Biomedical and Neuromotor Sciences, School of Dentistry and Dental Hygiene, University of Bologna, Bologna, Italy.
Objective:
The aim of this preclinical study was to compare the ability of tapered and cylindrical bristles to penetrate the peri-implant sulcus.
Methods:
A full mandibular dental arch was reproduced in plaster cast. In site #3.6 a hollow glass cylinder was positioned simulating a 4 mm diameter implant and the gingival component was recreated by using dedicated silicone. A Bass brushing technique was performed from the vestibular side in humid environment. During it, the penetration of the bristles between the gum and the implant was recorded by mean of an optic fibre fixed inside the cylinder. The protocol included 5 toothbrushes per group and 10 tests per toothbrush, for a total of 50 assessments for each of the two groups. A scale of 5 grades for bristle penetration was defined: grade 0 (× < 2 mm), grade 1 (2 ≤ × < 3 mm), grade 2 (3 ≤ × < 4 mm), grade 3 (4 ≤ × < 5 mm) and grade 4 (5 ≤ × < 8 mm). From the video recordings the highest value of penetration was identified for each test.
Results:
The tapered bristles showed an 8 times greater penetration capacity (p = 0.001) in respect to the cylindrical bristles (multilevel analysis). The percentage of tests reaching depths ≥3 mm was 86% for tapered group and 28% for the cylindrical group.
Conclusion:
This preclinical study shows a clear and superior penetration capacity of the tapered bristles in respect to traditional cylindrical ones. For tapered bristles, a potentially greater hygienic efficacy around dental implants is suggested.
