Visualization of the granule temperature using thermal imaging to improve understanding of the granulation mechanism...

The aim of this study is to increase process understanding of the granulation mechanism in twin-screw melt granulation by evaluating the influence of different screw configurations on granule formation and granule temperature via thermal imaging. The study used a Design of Experiments (DoE) to process a miscible and immiscible formulation (85% API/binder w/w) using a twin-screw extruder with varying screw configurations. The barrel temperature (°C), screw speed (rpm), throughput (kg/h), and kneading zone (direction and stagger angle) were varied. Granule and process properties were evaluated for samples collected at four different locations along the length of the granulation barrel to visualize the granule formation, and granule temperature was monitored by an infrared camera to measure heat transfer on the granules. The resulting temperature was linked to the granule properties and the granule formation along the length of the barrel. The most influencing factors on the granule temperature are the direction of the kneading zone and the set barrel temperature. It was observed that granule formation mainly occurred in the zones that apply more kneading on the granules. The highest temperature increase was observed when the smallest stagger angle in reverse configuration was used, and could be linked to better granule quality attributes.