Related Experiment Video
Updated: Aug 1, 2026

Solid-state Graft Copolymer Electrolytes for Lithium Battery Applications
Published on: August 12, 2013
Facile Synthesis of a SiO-Graphite Composite toward Practically Accessible High-Energy-Density Lithium-Ion Battery
Yupeng Xiao1, Yangyang Mao1, Tianle Li1
1School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, P. R. China.
Abstract:
SiO-based material is a promising candidate for lithium-ion batteries (LIBs) owing to its high theoretical capacity. The inherent disadvantages of poor electronic conductivity and large volume variation can be solved by constructing the outermost carbon layer and reserving internal voids. However, the practical application of SiO/C composites remains a great challenge due to the unsatisfactory energy density. Herein, we propose a facile synthetic approach for fabricating SNG/H-SiO@C composites, which are constructed by amorphous carbon, hollow SiO (H-SiO), and spherical natural graphite (SNG). H-SiO alleviates volume expansion, while amorphous carbon promotes Li+ migration and stable solid electrolyte interphase (SEI) formation. The as-prepared SNG/H-SiO@C demonstrates a high reversible capacity (465 mAh g-1), excellent durability (93% capacity retention at 0.5C after 500 cycles), lower average delithiation potential than SNG (0.143 V after 500 cycles), and a 14% gravimetric energy density improvement at a loading level of 4.5 mg cm-2. Even at a compacted density of 1.5 g cm-3, the SNG/H-SiO@C anode presents a modest volume deformation of 14.3% after 100 cycles at 0.1C.

