Related Experiment Video
Updated: Jul 16, 2025

Calibrated Passive Sampling - Multi-plot Field Measurements of NH3 Emissions with a Combination of Dynamic Tube Method and Passive Samplers
Published on: March 21, 2016
A novel low sampling rate and cost-efficient active sampler for medium/long-term monitoring of gaseous pollutants
Zhiyuan Wang1, Tao Yu2, Jin Ye3
1School of Energy and Environment, Southeast University, Nanjing 210096, China.
Abstract:
Active sampling is a dependable approach for gaseous pollutants monitoring, offering high accuracy and precision that is unaffected by environmental factors such as wind and temperature in comparison to passive sampling. To measure long-term average concentrations while minimizing the use of materials, a reduced sampling rate is necessary. Thus, this study aims to develop a novel low sampling rate (down to 1 mL/min) and cost-efficient active sampler (LASP) for medium/long-term monitoring of gaseous pollutants. The LASP mainly consisted of a syringe pump, a Y-shaped fitting with two one-way valves, and a control unit for intermittent operation. Results showed that LASP can obtain a sampling rate of less than 1 mL/min and sampling rate exhibited a high level of stability. Daily average concentrations measurements for nitrogen dioxide and formaldehyde by LASP had normalized mean biases of 2.8% and 5.2%, respectively. These numbers were - 5.8% and 6.1% for weekly-average samplings. This study demonstrated applications of LASP in real outdoor (daily-average) and indoor (weekly-average) air quality measurements. It worked well with low noise levels, and without interfering with occupants' daily activities. LASP can assist in improving our ability to monitor air quality and pollutants emissions, thereby supporting health research and policy development. ENVIRONMENTAL IMPLICATION: Gaseous air pollution is an important hazardous factor threatening human health. Medium/long-term air quality monitoring is essential for outdoor and indoor air quality assessment and control. However, air sampler for medium/long-term sampling is lacking. This study developed a novel low sampling rate and cost-efficient active sampler and applied it to medium/long-term air sampling. The sampler can work at a sampling rate of less than 1 mL/min. This technology provides a feasible strategy for medium/long-term monitoring of gaseous air pollutants in both environments and emission hotspots.
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Gas Chromatography: Types of Detectors-II
Sampling Methods: Overview
In analytical chemistry, the choice of...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...

