Qualitative, energy and environmental aspects of microwave drying of pre-treated apple slices

In the present research, response parameters such as specific energy consumption (SEC), thermal efficiency (TE), energy efficiency (EF), drying time (DT), greenhouse gas (GHG) emission (such as CO₂ and NO_x), and quality features (color variation and shrinkage) were modeled by response surface methodology (RSM) for apple slices dried in a microwave dryer under ultrasonication (30 ℃-10 min) and blanching (80 °C-2 min) pretreatments. Also, RSM was applied to optimize two independent parameters including microwave power and sample thickness in the levels 100, 200, and 300 W and 2, 4, and 6 mm, respectively. The results indicated the significant influence (P < 0.01) of the independent parameters on the response parameters. The vales of SEC, DT, GHG emission, shrinkage, and color difference were linearly decreased with the declining sample thickness and increasing microwave power, while the energy and thermal efficiencies were increased by a quadratic equation. The use of ultrasonication and blanching pretreatments decreased the SEC, GHG emissions, and DT; while improving the quality of the samples as compared to the non-treated slices. The optimization results showed the optimal drying times (31.55, 82.19, and 50.55 min), SEC (3.42, 10.07, and 4.37 MJ/kg), CO₂ with natural gas (1539.75, 1518.75, and 4585 g), CO₂ with gas oil (3662.53, 2099.25, 2721.25 g), NO_x with natural gas (10.094, 9.956, and 12.906 g), and NO_x with gas oil (12.934, 12.758, and 16.538 g) at a microwave power of 300 W and sample thickness of 2 mm with desirability of 0.921, 0.935, and 0.916 for control samples, ultrasonicated, and blanched, respectively.