Related Experiment Video
Updated: Jul 15, 2025

Experimental Methods of Dust Charging and Mobilization on Surfaces with Exposure to Ultraviolet Radiation or Plasmas
Published on: April 3, 2018
Study on disinfection effect of a 222-nm UVC excimer lamp on object surface
Peiyong Ning1,2, Yanzhen Han3,4, Yang Liu5
1Tianjin Centers for Disease Control and Prevention-Institute of Microbiology, Tianjin, 300011, China. 282536171@qq.com.
Abstract:
Effective disinfection of contaminated surfaces is essential for preventing the transmission of pathogens. In this study, we investigated the UV irradiance and wavelength distribution of a 222-nm ultraviolet C (UVC) excimer lamp and its disinfection efficacy against microorganisms in laboratory conditions. By using a carrier quantitative germicidal test with stainless steel sheets as carriers, we examined the disinfection effect of the 222-nm UVC lamp on three standard strains-Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. We tested the disinfection efficacy under different conditions by adjusting irradiation time, as well as the state and temperature of the stainless steel carriers. Our results indicated that a bacterial suspension in PBS and not-dried stainless steel carriers yielded better disinfection than in TSB and dried carriers. Additionally, carrier temperature had no significant impact on disinfection efficacy. When utilizing a bacterial suspension in PBS and non-dried carriers at a temperature of 20 °C, the three bacteria were eliminated by 222-nm UVC excimer lamp irradiation in just 15 s. In contrast, when using a bacterial suspension in TSB and dried carriers at temperatures of 20 °C, 4 °C, or - 20 °C, the three bacteria were eradicated by 222-nm UVC excimer lamp irradiation in 60 s. Comparatively, the LPM lamp required more than 10 min to achieve the same disinfection effect. Our data demonstrate that the 222-nm UVC excimer lamp has higher irradiance and a more potent microbial disinfection effect than the LPM lamp, requiring significantly less irradiation time to achieve the same disinfection effect under identical conditions. Furthermore, the 222-nm UVC excimer lamp exhibited a substantial disinfection effect on bacterial propagules at low temperatures. Our findings support the optimization of "tunnel-type" cold-chain goods disinfection devices, providing an alternative, highly efficient, and practical tool to combat the spread of SARS-CoV-2 through cold-chain systems.
More Related Videos
08:48Selective Area Modification of Silicon Surface Wettability by Pulsed UV Laser Irradiation in Liquid Environment
Published on: November 9, 2015
14:17The Portable Chemical Sterilizer PCS, D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
UV–Vis Spectrometers
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Antimicrobial Effectiveness