Comparative Studies on the Organogel Formation of a Polyester in Three Different Base Oils by X-ray Analysis,...

High-performance greases typically consist of a base oil and polyurea as a thickener material. To date, few alternatives to polyureas have been investigated. Polyesters could be one such alternative; however, little is known about the gelation of such polyesters because, unlike polyureas, they cannot form hydrogen bonds between the polymer chains. Here, we present studies on the gel formation of a polyester based thickener poly(hexane dodecanoate) with 1-octanol endgroups in three different base oils, i.e., a mineral oil (Brightstock 150), a synthetic Polyalphaolefin (Spectrasyn 40) and castor oil (85 to 90 wt.% ricinoleic acid triglyceride). Small- and wide-angle X-ray scattering measurements indicate a strong interaction of the polyester with castor oil and an increase in the crystalline fraction, with an increasing polymer amount from 5 to 40 wt.%. Moreover, infrared analysis of the polyester in castor oil showed gel formation at a minimum concentration of 20 wt.%. The strong interaction of the polyester with castor oil compared to the other two base oils led to an increase in the yield point γ_F as a measure of the mechanical stability of the gel, which was determined to be 5.9% compared to 0.8% and 1.0% in Brightstock and Spectrasyn, respectively.