An Active-Matrix Organic Light-Emitting Diode Pixel Circuit Featuring Mobility Compensation for Portable Applications
Related Experiment Video
Updated: Sep 25, 2026

Production and Characterization of Vacuum Deposited Organic Light Emitting Diodes
Published on: November 16, 2018
Ching-Lin Fan1,2, Wei-Yu Lin1, Shih-Yang Liu2
1Graduate Institute of Electro-Optical Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Da'an Dist., Taipei City 106, Taiwan.
Abstract:
A 6T1C pixel circuit based on low-temperature polycrystalline oxide (LTPO) technology for portable active-matrix organic light-emitting diode (AMOLED) display applications is proposed in this paper. For superior high-end portable applications including 4K high resolution and high PPI (pixels per inch), the proposed pixel circuit employs a single storage capacitor and signal sharing switch-control design and provides low-voltage driving and immunity to the IR-drop issue and OLED degradation. Furthermore, the threshold voltage and mobility-compensating capabilities are improved by both compensation mechanisms, which are based on a negative feedback system, and mobility-related compensation parameters. Simulation results reveal that threshold voltage variations of ±0.33 V in the driving thin-film transistors can be well sensed and compensated while the maximum OLED current shift is 4.25%. The maximum variation in OLED currents within all gray levels is only 1.05% with mobility variations of ±30%. As a result, the proposed 6T1C pixel circuit is a good candidate for portable AMOLED display usage.

