Optimization of LDO-Pectin Synthesis Conditions for the Removal of Metals from Wastewater: A Comparison of Response...

With the continuous growth of industrialization, the presence of heavy metals (HMs) in the environment has become a critical issue, necessitating cost-effective and efficient techniques for their removal. The present study aimed to determine the optimal preparation conditions for synthesizing pectin (PC) as a polymer sorbent, combined with Magnesium (Mg) Aluminum (Al) layered double oxides (LDOs), using a fast and facile co-precipitation method. Both the response surface method (RSM) and the Taguchi method were employed to optimize the influence of key independent variables, including the molar ratio of cations Mg:Al, the ratio of pectin to LDO, and the temperature for removing multiple elements from wastewater. The results indicated that RSM is more accurate and examines more interactions, while Taguchi reduces the number of tests and is more economical than RSM. However, both statistical methods showed good potential for predicting the adsorption capacity (Qe) of HMs. The optimal preparation conditions were identified as a molar ratio of 3:1, a ratio of pectin to LDO of 7% w/w, and a temperature of approximately 600 °C. In conclusion, the application of RSM and Taguchi approaches was found to be feasible and effective in optimizing the preparation conditions of modified LDO, which can be utilized as a potential adsorbent for removing multiple elements from wastewater.