Related Experiment Video
Updated: Jul 15, 2025

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores
Published on: November 20, 2014
Rock Mechanical Properties and Wellbore Stability of Fractured Dolomite Formations
Jianhua Guo1, Chaoyi She2, Houbin Liu3
1Engineering Technology Research Institute, PetroChina Southwest Oil & Gasfield Company, Chengdu, Sichuan 610000, China.
Abstract:
During the drilling process in the dolomite formation of the Leikoupo formation in western Sichuan, downhole obstruction frequently occurs, which seriously hinders the efficient development of oil and gas resources on site. In view of the problems of borehole stability existing in this type of formation, the geological characteristics, underground complexity, and fracture development of the research block were systematically identified and analyzed, and the physical parameters and mechanical properties of the rock were defined through physical and chemical tests and an understanding of the mechanical properties of the rock. These studies revealed the mechanism of borehole instability and the main factors influencing fractured dolomite formation. Finally, a model of borehole collapse pressure within fractured dolomite formation was established by selecting the appropriate strength criterion as the criterion of borehole instability. The results show that the dolomite fractures of the Leikoupo formation are relatively developed, the formation is dominated by low-angle fractures, and the core integrity is not high. The development of formation fractures has an obvious effect on the mechanical strength of rock, which decreases to different degrees with the decrease in the integrity coefficient of the rock mass, and the anisotropy of the rock's mechanical strength is obvious. The empirical parameters of the generalized Hoek-Brown (H-B) strength criterion were quantified by introducing rock mass acoustic data, and the accuracy of the improved generalized H-B strength criterion was evaluated using triaxial test data. Taking the M-C criterion, the generalized H-B criterion based on acoustic wave, the D-P criterion, and the weak surface strength criterion as wellbore instability criteria, combined with the distribution of wellbore stress, a prediction model of wellbore stability considering the degree of dolomite formation fragmentation was established. The results demonstrate that the generalized H-B criterion model based on acoustic waves can be used to evaluate the wellbore stability of dolomite fracture formation with more than one group of fractures. These research results have certain guiding significance for efficient and safe drilling in fractured dolomite formations.
More Related Videos
10:06Microfluidic Fabrication Techniques for High-Pressure Testing of Microscale Supercritical CO2 Foam Transport in Fractured Unconventional Reservoirs
Published on: July 2, 2020
10:27A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System
Published on: June 12, 2019
Related Concept Videos
Mortar Properties
Microcracking in Concrete
Mechanical Characteristics of Steel
The tension test is fundamental for determining tensile strength. In this test, a steel specimen is stretched using a gripping device until it breaks. The data collected during this test are used...
Brick Durability, Strength, and Appearance
Stress-Strain Diagram - Brittle Materials
Porosity in Cement Paste
The balance of water to cement in the mix is...