Assessment of air quality using AERMOD modeling: a case study in the Middle East

Emissions of greenhouse gases from industrial facilities, such as refineries, are one of the most significant environmental problems in many countries. This study aimed to assess the present status of emission sources near a gas refinery region, and the contribution of sources to air pollution was estimated by monitoring CO for a year at a fixed station. This descriptive-analytical study was conducted between January and December 2020. A simulation of CO gas distribution and pollutant concentration prediction was carried out. The results show that the maximum concentration of CO in the 1-h period was 2260 µg/m³, which corresponds to the peak concentration in spring, and in the 8-h period, it was 573 µg/m³, which corresponds to the peak concentration in winter. The studied area's maximum pollutant concentration was also compared to national and international standards for clean air. In all four seasons, the maximum simulated CO concentrations were lower than the Iranian and EPA standards for clean air. Maximum concentrations have occurred in the southern slopes of the study area's heights, and, due to the appropriate wind speed, maximum concentrations in the northeastern mountain peaks occurred at a more considerable distance due to the high altitude of the mountains and the lack of suitable conditions for pollutant escape. Furthermore, because of the height of smokestacks and flares from the ground and the effect of wind on the release height, the concentration of pollutants at the foot of the stacks is low and decreases gradually over a certain distance. Finally, the distribution and deposition of pollutants in the pathway of the smoke were influenced by the type of topography.