Related Experiment Video
Updated: Jul 15, 2025

Evaluation of the Efficacy of Organic Peroxyacids for Eradicating Dairy Biofilms Using an Approach Combining Static and Dynamic Methods
Published on: December 9, 2022
Past-expiration-date liquid disinfectants to deactivate biological and chemical toxins on building material surfaces
Je-Chuang Wang1, Wen-Chien Huang1, Ken-Fa Cheng1
1Department of Chemistry and Materials Engineering, Chung Cheng Institute of Technology, National Defense University Tahsi Taoyuan 33551 Taiwan buddhadzogchen@gmail.com ccitkhwu@gmail.com.
Abstract:
In this study, we evaluated the deactivating efficacy of strong basicity-based (T4-102) and hydrogen peroxide-based (DF-200) disinfectants that were past their expiration date when used to deactivate biological and chemical toxins on building material surfaces. The decontamination efficacies of DF-200 and T4-102 disinfectants against dimethyl methylphosphonate (DMMP) and 2-chloroethyl ethylsulfide (2-CEES) were studied using GC-MS analysis. The bactericidal efficacies of disinfectants against Gram-negative E. coli and P. aeruginosa, and Gram-positive B. subtilis and S. aureus, were assessed in terms of the zone of inhibition, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC). The results indicated that the deactivation efficacy varied significantly according to the disinfectant amount, contact time, and building material. Higher efficacy of up to 99-100% was observed for biological toxins, despite passing their expiration dates. Approximately 70-78% of deactivation efficacies were observed for disinfectants against DMMP on the tile coupon at 100 μL and 24 h contact time. Moreover, the deactivation efficacy of DF-200 was better than that of T4-102. The data presented here demonstrate that the responders may use past-expiration-date disinfectants for efficacious disinfectaion in large-scale contamination incidents.
Related Concept Videos
Chemical Agents for Microbial Control
Antimicrobial Effectiveness
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...

