An Experimental Approach to Induce Trips in Lower-Limb Amputees

Reestablishing balance after a trip is challenging for lower-limb amputees and often results in a fall. The effectiveness of reestablishing balance following a trip depends on factors such as amputation level (transtibial or transfemoral) or which limb is tripped (prosthetic or sound/lead or trailing). Understanding the recovery responses can help identify strategies to avoid a trip becoming a fall and what trip-response functionality could be designed into a prosthesis. This study presents an experimental approach for inducing unexpected trips in individuals with amputation. Tripping was manually triggered by activating an electromagnetic device to raisea polypropylene wire to obstruct (bring to a near halt) theswinging limb during its mid-swing phase. A safety harness attached to a ceiling rail ensured participants did not hit the ground if they failed to reestablish balance following the trip (i.e., it prevented a fall from occurring). One transtibial amputee completed repeated walking trials in which a trip was induced around 1 out of 15 times to avoid it being anticipated. 3D kinematics were determined via two smartphones (60Hz) using the OpenCap software, highlighting that the experimental approach induced meaningful tripping/recovery responses dependent on which limb was tripped (prosthetic or sound). The presented methodology avoids using a rigid obstacle, potentially reducing the risk of injuries, and is inexpensive and easy to set up. Importantly it permits a trip to be unexpectedly introduced during the mid-swing phase of the gait and hence provides an approach for identifying real-world trip recovery responses. When tripping the sound limb, participants could 'disentangle' from the trip-wire (post-trip) by plantarflexing the ankle, but such action was not possible when tripping the prosthetic limb.