An examining the static and dynamic mechanical characteristics of milled ramie root reinforced polyester composites

This research works discuss about the effective utilization of waste Ramie Root, that has been in reinforced polyester composites, powdered fillers that have not been treated are used. Four different composites plate were formed with compression moulding technique process consisting of 20, 30 and 40% of Powdered Ramie Root with 80, 70 and 60% unsaturated polyester resin, respectively. The maximum mechanical properties were observed for the composite with 30:70 weight volume percentages of milled ramie root synthetic reinforced polyester. The findings show that the glass transition temperature, storage modulus, and loss factors all rise when the composition of composites changes. Additionally, the powder cohesion force (bonding strength) has a greater impact on dynamic mechanical properties. Thermo-gravimetric the inclusion of Ramie Root powder caused the thermal deterioration peak of the composite to move from 370 °C to 418 °C, according to analysis (TGA) conducted under flowing oxygen. According to the measurement of water absorption, the ideal weight ratio of Fiber: Unsaturated Polyester Resin is 30:70, which modifies the fibres' surfaces and ensures optimal adhesion between the fibre and matrix in composite materials. Scanning electron microscopic investigation is done to ascertain the fracture behaviour of the composite. As a result of their stability, high tensile strength, and bending stiffness, the produced composites can be used in light-load applications by material technologists.