Improving the Anti-washout Property of Acrylate Grouting Material by Bentonite: Its Characterization, Improving...

Acrylate is a popular polymer grouting material that has been widely used to control groundwater seepage. However, the vulnerability of acrylate slurry to dynamic water washout restricts its application in groundwater environments characterized by high flow velocity and water pressures. In this paper, lithium bentonite (Li-B) was used to modify the traditional magnesium acrylate (AC) grouting material. The influence of Li-B to AC ratios on the modified materials' washout resistance was explored, and the modification mechanism was analyzed using X-ray diffraction (XRD), infrared spectroscopy (IR), and scanning electron microscopy (SEM). Finally, the anti-washout ability of the modified slurry was verified through engineering applications. Results revealed that LiB-AC grout had adjustable setting times (10.5 to 395.6 s), minimal bleeding (0.1%), higher viscosity (65 mPa·s) and expansibility (350%), stronger anti-water dispersibility (24 times that of pure AC slurry), higher mechanical strength (compressive strength is 0.386 MPa, tensile strength is 0.088 MPa), and better impermeability (2.23 × 10^-8 m/s). The lithium bentonite was beneficial to the setting time, bleeding, viscosity, slurry retention rate, impermeability, and mechanical strength of the acrylate grout. However, it diminished the expansibility of the acrylate grout. At the optimal acrylate content (20%), the mechanical strength and impermeability of the LiB-AC grout were the highest. The better performance of LiB-AC grout was attributed to the formation of a more stable and dense interlaced spatial network structure after the modification by Li-B. The LiB-AC grout was used in the dynamic water grouting project of a metro shield tunnel segment and achieved better anti-washout performance than cement-water glass and pure AC slurry.