Computational modeling of blood clot lysis considering the effect of vessel wall and pulsatile blood flow

Stroke is one of the major causes of global death, which can occur due to blockage in a blood vessel by a clot. The immediate dissolving of the clot is essential to restore the blood flow and prevent tissue necrosis. Clot dissolution can be achieved via thrombolytic therapy using plasminogen activators. In this study, a clot dissolution model is developed for a three-dimensional patient-specific carotid artery that investigates the effect of different vessel wall models on clot dissolution. The lysis pattern of the clot and hemodynamics of blood flow are evaluated using three different models of the vessel wall, namely, rigid, linear elastic, and Mooney-Rivlin hyperelastic. The effect of flow condition is considered by solving the Navier-Stokes equations for the free flow domain and the Brinkman equation for the clot domain with the same pressure and velocity fields. This will result in continuous pressure and velocity over the interfaces of the free flow and clot domains. The blood inflow is assumed to be pulsatile. In addition, the species transport driven by diffusion and convection is considered to be different in the porous medium and plasma. The obtained results show that in all models, the starting time of clot volume decrease is almost the same and the clot starts dissolving from the inner curvature of the artery. However, in the hyperelastic model, dissolving the clot takes longer compared to the other two models. By monitoring the vessel wall deformation, the exact time of vessel recanalization is determined.