Improved reduction efficiency, cycling performance, and removal rate of hexavalent chromium by adding water-soluble...

Recently, the reaction speed and cycle performance of hexavalent chromium reduction over microsized zero-valent iron (ZVI) with an Fe⁰ core and iron oxide (FeO_x) shell structure have been improved by activating the Fe⁰-core electrons through electromagnetic coupling between Fe⁰-core electrons and charges (hexavalent chromium in solution, double-charge layers of the ZVI/solution interface). Herein, the abovementioned electromagnetic coupling was greatly increased by adding salt (CH₃COONa, NaCl, NaNO₃, and Na₂SO₄) in the hexavalent chromium solution to increase the charge response. Adding salt greatly improved the reaction speed and cycle performance of hexavalent chromium reduction. It took 8 min to reduce hexavalent chromium with CH₃COONa to below the discharge standard of wastewater in the first cycle and 20 min after reducing for 20 cycles. The best apparent rate of constant value (0.416 (min)^-1) is nearly four times larger than those without salts. X-ray diffraction and X-ray photoelectron spectroscopy revealed the production of amorphous iron oxide shell with salt. The salt improves the hexavalent chromium reduction speed and cycle performance and impedes the Fe⁰-core-electron transfer via the produced Fe₂O₃, resulting in existence of an optimized salt dosage. This work aims to provide an effective route for enhancing the removal efficiency and cycle performance of heavy-metal-ion reduction via Fe⁰. And this work also proposes a novel viewpoint that adding salt in waste water would increase the electromagnetic coupling between the charges in solution and Fe⁰-core electrons which could finally activate the redox reaction.