Development of hydroxypropyl cellulose and graphene oxide modified molecularly imprinted polymers for separation and...

A novel hydroxylpropyl cellulose (HPC) modified graphene oxide (GO)-based molecularly imprinted polymers (HPC-GO-MIP) have been developed as a solid phase extraction (SPE) material for the selective separation and extraction of podophyllotoxin. In this strategy, the cellulose with rich hydroxyl groups was introduced to form bi-functional monomers with methacrylic acid to provide more recognition sites for the improving of extraction efficiency, then GO was added as a two-dimensional substrate for MIP to improve the material morphology and surface area. The extraction performances of obtained HPC-GO-MIP material were tested, and the results prove its high efficiency and selectivity for podophyllotoxin extraction. The saturated adsorption capacity reached 23.1 μg/mg, and high enrichment efiiciency of 463.8 folds was realized under the premise of ensuring the recovery rate. The selective imprinting factor was much higher than those of kaempferol and quercetin, which were the main compounds in podophyllum fruit. Under the optimized SPE conditions, the HPC-GO-MIP based SPE-HPLC method showed the detection limit of 14.2 ng/mL for podophyllotoxin assay. When applied to podophyllum fruit samples, the material showed excellent ability of selective separation and enrichment of podophyllotoxin, and the relative standard deviations (RSD) of intra and inter batches were less than 8.1 % and 5.7 % in real samples detection. The HPC-GO-MIP SPE method broadened the application for high multiple extraction in trace analyte samples and provided a valuable solution to improve the selective separation and detection.