Related Experiment Video
Updated: Jul 12, 2025
Synthesis and Testing of Supported Pt-Cu Solid Solution Nanoparticle Catalysts for Propane Dehydrogenation
Published on: July 18, 2017
Modeling the Selectivity of Hydrotalcite-Based Catalyst in the Propane Dehydrogenation Reaction
Giovanni Festa1, Palma Contaldo1, Marco Martino1
1Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, SA, Italy.
Abstract:
The propylene production processes currently used in the petrochemical industry (fluid catalytic cracking and steam cracking of naphtha and light diesel) are unable to meet the increase of propylene demand for industrial applications. For this reason, alternative processes for propylene production have been investigated, and among the others, the propane dehydrogenation (PDH) process, allowing the production of propylene as a main product, has been industrially implemented (e.g., Catofin and Oleflex processes). The main drawback of such processes is closely linked to the high temperature required to reach a sustainable propane conversion that affects catalyst stability due to coke formation on the catalyst surface. Accordingly, the periodic regeneration of the catalytic bed is required. In this work, the performance in the PDH reaction of different Sn-Pt catalysts, prepared starting by alumina- and hydrotalcite-based supports, is investigated in terms of propane conversion and selectivity to propylene in order to identify a more stable catalyst than the commercial ones. The experimental tests evidenced that the best performance was obtained using the catalyst prepared on commercial pellets of hydrotalcite PURALOX MG70. This catalyst has shown, under pressure conditions of 1 and 5 bar (in order to evaluate the potential future application in integrated membrane reactors), propane conversion values close to the thermodynamic equilibrium ones in all of the investigated temperature ranges (500-600 °C) and the selectivity was always higher than 95%. So, this catalyst was also tested in a stability run, performed at 500 °C and 5 bar: the results highlighted the loss of only 12% in the propane conversion with no changes in the selectivity to propylene. Properly designed experimental tests have also been performed in order to evaluate the kinetic parameters, and the developed mathematical model has been optimized to effectively describe the system behavior and the catalyst deactivation.
More Related Videos
12:08Catalytic Reactions at Amine-Stabilized and Ligand-Free Platinum Nanoparticles Supported on Titania During Hydrogenation of Alkenes and Aldehydes
Published on: June 24, 2022
09:21Tuning the Acidity of Pt/ CNTs Catalysts for Hydrodeoxygenation of Diphenyl Ether
Published on: August 17, 2019
Related Concept Videos
02:13Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
02:34Regioselectivity and Stereochemistry of Acid-Catalyzed Hydration
02:17Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
02:24Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
01:28Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
02:36Regioselectivity and Stereochemistry of Hydroboration
Hydroboration proceeds in a concerted fashion with the attack of borane on the π bond, giving a cyclic four-centered transition state. The –BH2 group is bonded to the less substituted carbon and –H to the more substituted carbon. The concerted nature requires the simultaneous addition of –H and –BH2 across the same face of the alkene giving syn...