Sulfur-graded kesterite structured film drives improvement of VOC

Realizing the graded bandgap in absorber layer is very essential for high efficient thin film solar cells. However, such bandgap modification in kesterite-structured Cu2ZnSnSe4 is normally realized via high temperature sulfurization process (above 500°C), which is not only difficult to control the sulfurization depth, but also introduces additional deep defects because of the decomposition of absorber layer at such high temperature. In this study, a low-temperature sulfurization process (150°C) is developed. Such process not only inhibits the decomposition of Cu2ZnSnSe4 films and controls the elemental distribution very well, but also increase the surface bandgap of the absorber layer and form a gradient energy bandgap. Also, the density of deep-level defects in the Cu2ZnSnSe4 layer is reduced. As a consequence, the open circuit voltage of the solar cell is improved by 60 mV. This study paves the way towards the high efficient kesterite solar cell and other solar cells.