Related Experiment Video
Updated: Jul 12, 2025

A Coupled Experiment-finite Element Modeling Methodology for Assessing High Strain Rate Mechanical Response of Soft Biomaterials
Published on: May 18, 2015
Effect of inelastic deformation on strain rate-dependent mechanical behaviour of human cortical bone
Piyush Uniyal1, Simran Kaur2, Vandana Dhiman2
1Department of Biomedical Engineering, Indian Institute of Technology Ropar, India; Biomechanics Section, Department of Mechanical Engineering, KU Leuven, Leuven, Belgium.
Abstract:
In this study, the role of inelastic deformation of bone on its strain rate-dependent mechanical behaviour was investigated. For this, human cortical bone samples were cyclically loaded to accumulate inelastic strain and subsequently, mechanical response was investigated under compressive loading at different strain rates. The strain rate behaviour of fatigued samples was compared with non-loaded control samples. Furthermore, cyclic loading-induced microdamage was quantified through histological analysis. The compression test results show that the strength of fatigue-loaded bone reduced significantly at low strain rates but not at high strain rates. The difference in microcrack density was not significant between fatigued and control groups. The results indicate that the mechanism of load transfer varies between low strain rate and high strain rate regimes. The inelastic deformation mechanisms are more prominent at low strain rates but not at high strain rates. This study shed light on the role of inelastic deformation on the rate-dependent behaviour of cortical bone.
Related Concept Videos
Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity
Plastic Behavior
Strain and Elastic Modulus
Strain-Energy Density
In the elastic region of a material, the relationship between the stress and the strain is linear and follows Hooke's Law. The strain energy density in this...
Normal Strain under Axial Loading
Hooke's Law

