A BTO/PVDF/PDMS Piezoelectric Tangential and Normal Force Sensor Inspired by a Wind Chime

There is a growing demand for flexible pressure sensors in environmental monitoring and human-robot interaction robotics. A flexible and susceptible sensor can discriminate multidirectional pressure, thus effectively detecting signals of small environmental changes and providing solutions for personalized medicine. This paper proposes a multidimensional force detection sensor inspired by a wind chime structure with a three-dimensional force structure to detect and analyze normal and shear forces in real time. The force-sensing structure of the sensor consists of an upper and lower membrane on a polydimethylsiloxane substrate and four surrounding cylinders. A piezoelectric hemisphere is made of BTO/PVDF/PDMS composite material. The sensor columns in the wind chime structure surround the piezoelectric layer in the middle. When pressure is applied externally, the sensor columns are connected to the piezoelectric layer with a light touch. The piezoelectric hemisphere generates a voltage signal. Due to the particular structure of the sensor, it can accurately capture multidimensional forces and identify the direction of the external force by analyzing the position of the sensor and the output voltage amplitude. The development of such sensors shows excellent potential for self-powered wearable sensors, human-computer interaction, electronic skin, and soft robotics applications.