Fabrication of a Highly NO₂-Sensitive Gas Sensor Based on a Defective ZnO Nanofilm and Using Electron Beam...

Hazardous substances produced by anthropic activities threaten human health and the green environment. Gas sensors, especially those based on metal oxides, are widely used to monitor toxic gases with low cost and efficient performance. In this study, electron beam lithography with two-step exposure was used to minimize the geometries of the gas sensor hotplate to a submicron size in order to reduce the power consumption, reaching 100 °C with 0.09 W. The sensing capabilities of the ZnO nanofilm against NO₂ were optimized by introducing an enrichment of oxygen vacancies through N₂ calcination at 650 °C. The presence of oxygen vacancies was proven using EDX and XPS. It was found that oxygen vacancies did not significantly change the crystallographic structure of ZnO, but they significantly improved the electrical conductivity and sensing behaviors of ZnO film toward 5 ppm of dry air.