Related Experiment Video
Updated: Jul 11, 2025

Using a Virtual Reality Walking Simulator to Investigate Pedestrian Behavior
Published on: June 9, 2020
Exploratory analysis of evasion actions of powered two-wheeler conflicts at unsignalized intersection
Pranab Kar1, Shivkant Kumar1, Shivasai Samalla1
1Indian Institute of Technology Guwahati, India.
Abstract:
The study investigates the braking and steering evasions of powered two-wheelers (PTWs) during severe conflicts observed at an unsignalized intersection. Traffic conflicts were detected using a surrogate safety indicator called anticipated collision time (ACT). Then the peak-over-threshold approach was used to identify the severe conflicts and the evasive actions. Conflicts between right-turning PTWs and through-moving vehicles, through-moving PTWs crossing through-moving vehicles, and merging/diverging PTWs were analyzed using the minimum ACT (ACTmin), maximum deceleration rate (DRmax), maximum yaw rate (YRmax), and time of evasive action (TEA). The evasive actions were classified into five categories: driver/rider error, no-evasion, braking-only, steering-only, and both braking and steering. Analysis reveals that right-turning PTWs experience higher crash risk (0.7 %) than the other movements. PTW riders primarily employ extreme steering maneuvers (greater than 13 degrees/s) to evade conflicts, whereas braking rates lie in the normal ranges (less than 1.5 m/s2). The time of evasive action varies between 2.04 and 2.44 s, with the right-turning PTW riders responding early. Through-moving riders commit errors while evading severe conflicts and perform fewer evasive actions than right-turning and merging/diverging riders. Right-turning riders perform more steering-only evasions than braking-only, whereas the riders involved in the other two conflicts execute more braking-only evasions. These findings suggest that conflict type influences riders' braking and steering responses. Hence, future applications in advanced driver/rider assistance systems and training programs should consider appropriate evasive action strategies for different conflict types.
Related Concept Videos
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Manipulation and Analysis
One-Way ANOVA
Design Example: Measuring Distance Between Two Points with Obstructions
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...
Power Dissipated in a Circuit: Problem Solving
The simplest combinations of resistors are series and parallel connections. In a series circuit, the first resistor's output current flows into the second resistor's input; therefore, each resistor's current is the same. Thus, the equivalent resistance is the algebraic sum of the resistances. The current through the circuit can be found from Ohm's law and is equal to the...

