Water Flow-Driven Coupling Process of Anodic Oxygen Evolution and Cathodic Oxygen Activation for Water...

Electrochemical advanced oxidation process (EAOP) is a promising technology for decentralized water decontamination but is subject to parasitic anodic oxygen evolution and formation of toxic chlorinated byproducts in the presence of Cl^-. To address this issue, we developed a novel electrolytic process by water flow-driven coupling of anodic oxygen evolution reaction (OER) and cathodic molecular oxygen activation (MOA). When water flows from anode to cathode, O₂ produced from OER is carried by water through convection, followed by being activated by atomic hydrogen (H*) on Pd cathode to produce ^•OH. The water flow-driven OER/MOA process enables the anode to be polarized at low potential (1.7 V vs SHE) that is lower than that of conventional EAOP whose ^•OH is produced from direct water oxidation (>2.3 V vs SHE). At a flow rate of 30 mL min^-1, the process could achieve 94.8% removal of 2,4-dichlorophenol (2,4-DCP) and 71.5% removal of chemical oxygen demand (COD) within 45 min at an anode potential of 1.7 V vs SHE and cathode potential of -0.5 V vs SHE. To achieve the comparable 2,4-DCP removal performance, 4.3-fold higher energy consumption was needed for the conventional EAOP with titanium suboxide anode (anode potential of 2.9 V vs SHE), but current efficiency declined by 3.5 folds. Unlike conventional EAOP, chlorate and perchlorate were not detected in the OER/MOA process, because low anode potential <2.0 V vs SHE was thermodynamically unfavorable for the formation of chlorinated byproducts by anodic oxidation, indicated by theoretical calculations and experimental data. This study provides a proof-in-concept demonstration of water flow-driven OER/MOA process, representing a paradigm shift of electrochemical technology for water decontamination and prevention of chlorinated byproducts, making electrochemical water decontamination more efficient, more economic, and more sustainable.