Investigation of the effect of Ni and Cu variant MOF-74 in the Polydimethylsiloxane (PDMS)-based Mixed Matrix...

Mixed matrix membranes (MMMs) containing metal-organic frameworks (MOFs) have been an emerging and promising membrane technology to contribute to different gas separation applications including carbon dioxide (CO₂) and oxygen (O₂) separation, because of their large surface areas and distinctive gas adsorption features. In this work, the fabrication process of Polydimethylsiloxane (PDMS)-based MMMs was reported, in which 0.5 to 2 wt.% of each type of (Cu, Ni)-based MOF-74 variants were incorporated into a PDMS matrix in order to achieve high CO₂/N₂, O₂/N₂, and CO₂/O₂ separation efficiency. These MMMs and their nanofillers (MOF-74) were extensively characterized using scanning electron microscopy (SEM) along with Energy Dispersive X-Ray (EDX) mapping, X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), a single gas permeation testing system, and an ultimate tensile strength testing (UTS) unit in order to gain insight into their properties in relation to their gas separation performance. The 1 wt.% of both (Cu and Ni)-MOF-74@PDMS were selected as the most optimum MMMs due to their uniform morphology and enhanced tensile strength, which exhibited high CO₂ permeabilities of 4432 Barrer (37.9% increase) and 4288 Barrer (33.5% increase), respectively. Furthermore, in the case of 1 wt.% Ni-MOF-74@PDMS, the CO₂/N₂, O₂/N₂, and CO₂/O₂ selectivities were also enhanced to 36.2 (141.6% increase), 3.2 (21.9% increase), and 11.25 (98.1% increase), respectively. While, in the case of 1 wt.% Cu-MOF-74@PDMS the CO₂/N₂ and O₂/N₂ selectivities showed an increment up-to 94.7 (531.5% increase) and 6.47 (145% increase), respectively, Whereas, at 0.5 wt.%, Cu-MOF-74@PDMS showed the best CO₂/O₂ selectivity of 25.26 (344.7% increase).