Solvent-Free, One-Pot Synthesis of Tungsten Semi-Carbide for Stable and Self-Hydrating Short-Side-Chain-Based Polymer...

Polymer electrolyte membranes (PEMs) that promote fast and selective ionic transport at low relative humidity (RH) are of high demand for energy conversion devices, particularly in hydrogen fuel cells. Herein, we report a facile and solvent free synthesis of tungsten semi-carbide (W₂C@NC) and its incorporation onto short side chain (SSC)-based membrane matrix to facilitate water holding and water-assisted humidification generated by the reaction of crossover gas molecules. In the present study, the influence of W₂C@NC on the membrane matrix is widely investigated through its microstructure, physicochemical properties, proton conductivity, and fuel cell performance. It is demonstrated that addition of W₂C@NC facilitates membrane hydration via in situ water generation, thus preventing fuel crossover across the membrane. In addition, W₂C@NC contributes toward low-humidity polymer electrolyte fuel cell (PEFC) operation. The study revealed minimal differences in cell performance between fully humidified and low RH conditions for composite membranes, with a noteworthy improvement in performance observed even under completely dry conditions compared to pristine membranes. Apart from good thermal and mechanical stabilities, 81% of initial OCV and 72.86% of current density was retained even after 100 h of accelerated stress test (AST), which opens further perspectives for development of perfluoro sulfonic acid (PFSA) based low RH proton exchange membrane fuel cells (PEMFCs).